Why use a strawberry tester?
Burrs are tools that we use daily during our pedicure treatments. We use these burrs with our micromotors and turbines. It is essential to use quality burrs to avoid damaging the equipment used such as the handpiece or turbine.
Thanks to the cutter tester you can check the concentricity and correct alignment of the axis of your cutters to ensure their correct conformity.
A warped and damaged cutter will cause premature wear of your handpiece. To avoid causing irreparable damage to your handpiece and micromotor, check the axis and conformity of your strawberry using a strawberry tester.
Step-by-step guide to using your strawberry tester
Steps to test your strawberries :
1. Insert your strawberry into the tester
2. If the cutter inserts easily, without the need for force, then your cutter is compliant and usable.
3. If you have to apply pressure to insert the bur into the tester, we advise you not to use this bur anymore. It could damage your micromotor and your handpiece.
It is very important to regularly check the condition of your burs using the bur tester. This can save you significant costs due to damage to the handpiece or micromotor.
